Home Contact Support

Nicherons International Inc

Everything   Over IP 

** SPECIALIST **

In business class phone systems & VoIP products

Catering to SOHO, Small and Medium sized businesses

 
Unified Communication & Voip Solution

Categories

SpoTel: TDM410Pv2 / TDM410ev2

Power by SpoTel is a - Quality Assurance

http://www.nicherons.com/images/ippbx_back.jpg
Official Elastix
Certified Hardware












New Integrated 4 ports FXO / FXS PCI or PCIe Card
Asterisk Elastix Trixbox Compatible

**** SpoTel ® by Nicherons Canada ****

Build your own IP PBX
Easy Installation

World 1st "Ver.2"  4-port voice card

  INTEGRATED  TDM410Pv2

Why will you buy the old designed TDM410/400 (version 1) 

when the new V2 is available.

V2 can do everything V1 does,

with additional new features

: FXO Power Failover

: Easy Plug-&-Play Installation

: Universal dimensions: Half or full height

: Wide interop compatibility

: Built-in thunder, power surge line protectors

: Low power consumption

: No need of extra power connector


FXO Power Failover:

is a hardware feature that allows connectivity to an analog phone patched into the right pair of wires to be activated by a relay upon power outage. It has been the weakness of the VOIP system since   voip is invented. Upon power outage, voip phone systems are dead. V2 is now the SOLUTION. Two protection pairs could be formed when FXS are present in the card. 

When the system is up, all FXO & FXS will work according to the Outbound & Inbound Routes in the system. 

When the system power is down, the FXSs will connect to its paired FXO automatically. An example of the application;

: cordless phone on a FXS

: system is up, it will make/receive calls through voip trunk & the landline according to the Outbound/Inbound routes of the system

: system is down, the phone can still work with the landline, especially important for emergency purpose.

                                       

                                                                                                                                                                                                                                                                 

                               

                                                                                                                                                            

http://www.nicherons.com/images/PBX08.png










Easy Plug-&-Play Installation:

The card is compatible to work with most Open-Source PBX software in the market and supports built-in open-source software echo cancellation. NO 3rd PARTY software patch is require!
It works with standard Asterisk Dahdi driver in near plug-&-play installation.

Universal dimensions:

PCI card: height * length * thickness (57mm x 162mm x 20mm)
PCIe card: height * length * thickness (57mm x 180mm x 20mm)

The card's in half-height, half-length & comes with 2 FACEPLATES. So it will fit to HALF-HEIGHT SLOT or FULL-HEIGHT SLOT.
It is a 2U card, but can fit in 2U, 3U & standard height
4U with appropriate faceplate brackets.
[No need of Riser card module in most server systems any more] 


Wide interop compatibility:

The socket is pin-to-pin compatible with any Digium FXO, FXS modules. You could use any modules from existing version 1 card on the version 2. The version 2 FXO/FXS modules could also be used in any Digium compatible cards.

You could also mix-and-match the version 2 and regular TDm400 or TDM410 cards in the same system.

  Built-in thunder,  power surge line protections:
Surge & thunder safeguards are designed in the analog modules as the 1st layer of protection & the 2nd layer of safeguards on the card itself. This will help to prevent the system failure & many unexpected issues caused by the power surge on the line that most people don't even aware.

Low Power Consumption & 

no need extra power connector:

Together with its universal dimensions, the card could be installed   in nearly any PC of your choice; including
small form factor (SFF),   Thin-client PC, mini-ITX PC

Features:

 
- Brand New Digium TDM410P compatible (*)
  - Any combination of FXO / FXS ports are available

TDM410-40 (4 FXO, 0 FXS)
TDM410-31 (3 FXO, 1 FXS)
TDM410-22 (2 FXO, 2 FXS)

TDM410-13 (1 FXO, 3 FXS)

TDM410-04 (0 FXO, 4 FXS)

You don't need any special expertise

Only few commands on the CLI interface, the card will be installed (instruction included)

100% fully compatible with Digium (*) 4 port card

  Quick summary:


TDM410v2 PCI/PCIe card will work in any country that uses analog telephones (FXS port) or phone lines (FXO port). Connect it to any analog phone or your telco analog telephone line or any analog PBX. Build your own analog or hybrid PBX, Switch calls, build IVR services, add Voicemail, Speech to text, Text to Speech, fax sending / receiving or Call centers.


ROHS compliant (No Lead in PCB and parts).
Certificates: CE, FCC


Package includes:


BRAND NEW TDM410v2 card in original packaging
2 year manufacturer's warranty
Email & Voice support to get you started

** Multiple SpoTel cards can be installed  in a system **

Livehelp
Designed for ANY PBX software that works with standard Aseterisk Dahdi, including